Home Products Contact Enquiries  



Gilbeyco filter and pump spares, page 2

Spare parts for Gilbeyco MAXAREA filter pump models 0310M, and 0930M (with base inlet and outlet). Most of these parts are common across the range of Gilbeyco filter units, so the part you're looking for may be in this list , even if this isn't your model of pump.

FA002A   Pump Delivery Casing
FA005-1   Stainless Steel Pump Shaft
FA005-11   Durcoton Pump Shaft
FA006-1S   Complete seal set Type I
FA006-11S   Complete Seal Set Type 11
FA006-CR   Complete seal set Silicon Carbide CRS-15
FA010A   Motor.1hp.3/50/420v,Foot Mounting
FA014   Impeller,2 Bladed
FA015A   'O' Ring for Pump Joint EPDM
FA016A   Pump Suction Casing
FA016S   M5 x 12 Screw + Washer,SS,Set of 8
FA025A   Connecting pipe for 25mm bore hose
FA025B   Pump outlet adaptor for 25mm bore hose
FA025C   25mm bore hose connector + 2 ss clips
FA025D   Connecting pipe for 1" thread
FA026   1" BSP S.S. Nut
FA030   Drain-valve/Air-release 3/4"
FA031   Flat rubber gasket, 22mm hole
FA032   1" to 3/4" Threaded adaptor
FA033   'O' Ring for threaded adaptor
FA035   Flanged outlet pipe & back nut 40mm
FA036   90deg. connector,nut seal for 1.1/4" bore hose
FA046   Dome Nut + Washer, SS.
FA047A   Filter Lid With Pressure Gauge Hole
FA047M   Membrane for Pressure Gauge
FA047FM   Fixture for gauge membrane
FA047PGA   Pressure Gauge Adaptor
FA047PG   Pressure Gauge
FA049   Filter Outlet Block
FA049B   Adaptor flange for Air Release Valve
FAM049C   Air Release Valve
FA050   Ring nut for Outlet Block
FAM051   Centre Column for MAX 0310
FAM051T   Centre Tube for Maxarea Filters
FAM055B   Bottom Manifold plate for Maxarea filter
FAM055F   Sealing Felt for Maxarea Filters
FAM055T   Top Manifold plate for Maxarea filters
FA057A   Flanged Rubber for Filter Lid
FAM060   P.P. Nut for Max centre column
FA061   Fixing Set per Eye Bolt,SS.
FA062   Eye Bolt,Stainless Steel-0310/0620/0930
FA063   Washer for Filter Lid Clampnut,PVDF
FA064   Clamp Nut for Filter Lid
FA069   SS Base Assembly with wheels,Pillars & Rubber Packing
FA072   Rubber Packing for Stainless Steel Filter Base
FA081   Polyprop Filter House + S.S.Rings + fittings for 0310
FA081B   Polyprop Filter House + SS Clamp Rings + fittings 0930
FAM190   Clamp Tube for Maxarea filters
FAM191   Centre Column for Maxarea 0930
FAM191A   Clamp Tube for 0930 Maxarea filter
FAM191B   P.P. Nut for Max Clamp Tube